Home › E-Liquids › Onnix 3
Troubleshooting Guide Guide for Freemax Onnix 3
Published 2026 · VapeWholesaleHub trade desk
Most Onnix 3 field issues have simple causes that shop staff can resolve in minutes.
Buyers who treat troubleshooting guide as a commercial discipline rather than an afterthought tend to hold margin for longer.
Seasonality interacts with troubleshooting guide more than most forecasts allow for, so a rolling review beats an annual one.
Why troubleshooting guide matters on the Onnix 3
Weak vapour usually means a depleted coil or a low charge state.
Documentation is not paperwork for its own sake; on troubleshooting guide it is the difference between a clean clearance and a delayed one.
A burnt note almost always indicates the coil needs replacing.
Reference specification
| Item | Value |
|---|---|
| Model | Onnix 3 |
| Brand | Freemax |
| Category | E-Liquids |
| Battery | 400 mAh |
| Output range | 12-80 W |
| Capacity | 4.0 ml |
| Charging | USB-C fast charge |
| Coil options | 0.6 / 0.8 / 1.0 ohm |
| Carton quantity | 50 units |
No draw at all is typically an airflow or connection issue rather than a battery failure.
Practical notes for buyers
The most common mistake is optimising for the first order instead of the fourth, which is where Onnix 3 economics actually settle.
Documentation is not paperwork for its own sake; on troubleshooting guide it is the difference between a clean clearance and a delayed one.
Checklist
- Keep certificates current and filed against the exact model name.
- Verify that artwork matches the approved compliance template.
- Confirm the exact configuration in writing before the deposit is paid.
- Request batch photographs and a packing list prior to shipment.
- Check carton quantities against the commercial invoice line by line.
- Review the reorder point after one full selling cycle.
Commercial terms
Lead times are a function of component availability as much as factory capacity, so buffers should reflect both.
Lead times are a function of component availability as much as factory capacity, so buffers should reflect both.
| Volume tier | Indicative unit level | Lead time |
|---|---|---|
| Carton (104 units) | Tier 1 | 7-12 days |
| Pallet (1979 units) | Tier 2 | 21-30 days |
| Container (13839 units) | Tier 3 | 21-30 days |
Frequently asked questions
What is the most common Onnix 3 support issue?
Coil life complaints lead, and most are resolved by priming correctly and avoiding chain draws.
What happens if a batch fails inspection?
The agreed procedure normally covers replacement of affected units or credit against the next order, documented before shipment.
Can several models be mixed in one shipment?
Yes, mixing models and flavours within a carton or pallet is common and usually helps first time buyers test demand.
Do you support long term supply agreements?
Yes, rolling agreements with defined review points work better for both sides than rigid annual commitments.
Final word
Start with one change, measure it over a quarter, then decide whether it deserves to become policy.
Trade enquiry
Quotations, samples and artwork files are available on request. Please state model, quantity per SKU, destination and target delivery window.